24
2)
When the machine is working, especially when working up and down slopes and
in dangerous areas, fasten the safety belt.
3)
When the excavator is going up the slope,
drive at low speed, the driving wheel
should be in the lower direction of the
slope, the arm and bucket should be fully
extended parallel to the slope, and the
bucket teeth should be 20-30cm away from
the ground, and the platform should be locked.
4)
When the excavator is going downhill, the
platform should be locked, the driving wheel
should be in the direction of the slope, the arm
and boom should be fully extended, and the
bucket teeth should be 20-30cm away from the
ground, and the slope should be downhill at
low speed.
5)
Do not turn on the slope or cross the slope. Be
sure to go down to a flat place to change the
position of the machine, and then go up the
slope again.
6)
When working on a slope, start from a high
place and dig gradually in the downhill
direction, with the dozer at the rear and pressed
against the ground. The drain position should
be placed in the uphill direction.
7)
Travel at a low speed on grass, leaves or wet