106
WARNING: Avoid inhaling oil vapor, swallowing or prolonged
contact with used oil.
3
）
Clean the oil drain plug and reinstall it, if the seal is damaged, replace it.
4
）
Open the oiling hole.
5
）
Refill with new oil until the oil quantity reaches the "maximum" mark H of the
oil scale.
6
）
Put the oil filler cap on and let the engine run idle for 5 minutes.
7
）
After the engine stops for 10-20 minutes, check the oil level. If necessary, add
oil.
5.11.3.
Replace the engine oil filter element
First cleaning after 50 hours of new engine operation, and then cleaning or replacement
every 250 hours.
5.11.4.
Oil filter replacement
1
）
Loosen and remove the oil filter cartridge.
2
）
Oil the gasket of the new filter element and fit it in the ring groove at the end of
the filter housing.
3
）
Start the engine and check the seal of the oil filter installation.
4
）
Stop the engine and check the oil level. If necessary, refill the oil.
