62
4.8.
Working on slope or water
WARNING: Working near slopes in the foothills is very dangerous. Rain,
mud, snow, ice, loose sand, and soft ground pose potential hazards. Make
sure it is completely safe before operate.
4.8.1.
Slope
When traveling, raise the bucket about 20~30cm off the ground.
Do not travel backwards downhill.
When traveling over obstacle, keep the working device close to the ground and
travel slowly.
Do not turn or go side ways on the slope. You can go to a flat place to turn
beforehand.
When working on a slope, turning or operating the working device can cause the
machine to lose balance and tip over, so avoid doing so.
When the bucket is loaded, it is very dangerous to turn in the downhill direction,
so build a platform on the slope with soil so that the machine can be balanced
during operation.
Do not go up or down steep slopes, as there is a risk of the machine tipping over.
When traveling uphill, if the track plate slips , do not use working devices to help
the machine go up the slope, as there is a danger of the machine tipping over.
Make sure that the engine and hydraulic oil are properly warmed up when
traveling up a slope, otherwise it may cause an accident.
