41
3.2.
Safety locking components
WARNING:
The working device safety locking mechanism is an important part of the
safety system. The safety lockout must be engaged when the operator leaves the cab.
If the joystick locking mechanism is not in the locked position, the handle may move
and cause the working device to actuate, resulting in an accident.
Pilot system locking and unlocking
Pull the pilot safety lock lever to top position
and lift the left control box before start the
ignition. In this condition, the pilot system
control does not supply oil, the machine work
device , platform Swinging, etc. cannot work
(except for the left and right travel control).
After pushing the pilot safety locking handle
forward and pressing it to the bottom and
putting down the left operation box, the pilot
system will be connected with the oil pressure
source and the machine can work normally.
Platform locking mechanism (optional)
WARNING: The platform locking mechanism is an important part of
the machine safety system. When the machine is transported, traveling,
parked or stopped on a ramp, the
platform must be locked.
Platform locking and unlocking
Lift the platform locking pin up, as shown in
the figure, the pin on the bent plate a hangs
at the lower box c, unlocking the platform
from the bottom frame.
When the locking pin is lowered, the bent