![background image](http://html1.mh-extra.com/html/yuchai/yc20sr/yc20sr_operation-manual_3666187081.webp)
72
dimensions provided in this manual.
4.15.3.
Fixing the machine on the transport vehicle
1)
Set up the working device.
2)
Turn off the engine and remove the key from
the starter switch.
3)
Lock the platform.
4)
Lock the cab and the engine hood.
5)
Place pads under the ends of the tracks to
prevent the machine from moving during
transport and tie the machine securely with wire
rope. Take special care to secure the machine so
that it does not slide to one side.
4.15.4.
Unloading from the transport vehicle
1)
Load and unload on a firm, level surface and maintain a safe distance from the
edge of the road.
2)
Apply brakes to the transport vehicle and place pads under the tires to ensure that
the vehicle does not move.
3)
Install a ramp between the transport vehicle and the machine. Make sure that both
sides of the ramp are on the same level. Make sure that the ramp slope does not
exceed a maximum of 15 degrees. Adjust the distance between the ramps to