YX3000 Senseless Vector Type Inverter Manual
- 43 -
6: analog setting via CI terminal
7: via pulse terminal
8: combination setting
4.1.3 Inverter Running States
When inverter power on, there are two states which are Standby and running state.
Standby state:
When power switch on, inverter will be in standby state before receiving
control command. Or receiving Stop command during inverter running, inverter will stop and
standby.
Running state: After running control command is received, the inverter enters running state
4.1.4 The Running Modes of Inverter
There are five running modes according to priority which are JOG running, close loop
running, PLC running, multi-stage speed running, and normal running as shown in Fig.4-1.
0
：
JOG running
In stopping state, after receiving JOG running command, the inverter will run according to
JOG frequency, for example, by pressing control pane l
key to give JOG
command(refer to function codeP3.06~P3.08).
1
：
Close loop running
By setting close loop running control parameter enabled (P7.00=1), the inverter will enter
close loop running, that is PI regulation (refer to function code P7). To make close loop
running invalid, please set multifunctional input terminal (function27) and switch to lower
priority running mode.
2
：
PLC running
By setting PLC function parameter enabled (P8.00
≠
0), the inverter will enter PLC running
mode and run according to preset running mode (refer to function code P8 ).To make PLC
running invalid, please set multifunctional input terminal ( function29 ) and switch to lower
priority running mode.
JOG
Summary of Contents for YX2000
Page 19: ...YX3000 Senseless Vector Type Inverter Manual 18 W W1 H H1 D b Inverters from 11KW to 90 KW...
Page 21: ...YX3000 Senseless Vector Type Inverter Manual 20 W H D d Inverters from 285KW to 315KW...
Page 22: ...YX3000 Senseless Vector Type Inverter Manual 21 W H D e Inverters from 350KW to 630KW...
