YSI WaterLog Series, Owner'S Manual

Page: 43 / 174

Removing Outputs
An Output can be removed from a Task by selecting the desired Output on the Edit Task screen
and pressing the Remove Output button. A prompt will appear verifying this is correct.
Removing an Output from a Task will only affect that Task. For example, removing a Log To
File Output from
myTask will only prevent myTask from being recorded to that log file on future
scans. All other Tasks recording to that log file will continue to log as expected.
Running a Task
On occasion, a Task may want to be tested to verify everything works according to its setup.
Pressing the Run Task button will execute the Input and Output(s) assigned to that Task.
Note that if a scan is already in progress, the Task will be executed when the scan is complete.
System 5000
Managing Tasks 4-17
TM