YSI WaterLog Series, Owner'S Manual

Page: 33 / 174

The following Task Schedule shows a Task beginning measurements at 6am, running until noon
(12pm), then starting again at 6pm. As no relating Disable Task Scanning Action follows the last
Action, the Task will continue scanning until midnight and then stop again until 6am the
following day where the schedule will be repeated.
If any errors are found within the Task Schedule, an error message will be displayed when the
OK button is pressed. All errors must be corrected before a Task Schedule can be used. There
are no limits to the number of Actions and Times that can exist within a Task Schedule.
Scan Times: Lists the scan times for the Task dependent on the Scan Rate, Scan Offset, and
Task Schedule. To view a full day’s listing of Scan Times, press the View All button.
System 5000
Managing Tasks 4-7
TM