YSI WaterLog Series, Owner'S Manual

Page: 31 / 174

Adjusting the Scan Rate
Each Input can have its own individual Scan Rate as shown on the Task’s Input Properties page.
Input Properties screens are accessed through either selecting a new Input or pressing the Edit
Input button on the Edit Task screen. Simple scan rates can be edited by pressing the Edit button
next to the current Scan Rate. Advanced Scanning Options such as Scan Offsets, Start/Stop
Times and Scan Intervals can be attributed to individual Tasks by pressing the Advanced (Adv)
button.
Scan Rate: Defines the interval at which the Task will acquire a new measurement or retrieve a
new value. This value is based off a 24-hour format with 00:00:00 indicating 24 hours. The
format is HH:MM:SS.
System 5000
Managing Tasks 4-5
TM