20-1
IM WT1801-01EN
20 Printing Screen Images and Numeric Data
(Option)
You can use the built-in printer to print screen images and numeric data lists. You can also add comments to
screen images.
If you use automatic printing, screen images and numeric data lists are printed automatically at the specified
print interval. Also, you can set scheduled automatic printing start and stop times to print at a specific time.
Printing Conditions (PRINT MENU)
You can configure the following printing conditions.
•
•
Automatic printing execution (Auto Print ON)
•
Automatic printing (Auto Print Settings)
•
•
Output Format (Format)
You can select the data format to print from the options listed below.
• Screen: Screen image data
• List:
Numeric list data
Printed Items
If you set the output format to numeric data list (List), the printed items vary as indicated below depending on the
display that is shown.
• When numeric values are displayed in the 4-, 8-, or 16-value display or the matrix display
All the measurement functions on the page that is displayed when printing starts are printed in the order that
they are displayed.
• When numeric values are displayed in the single or dual harmonics list
In addition to the data described above, the data of harmonics that are not displayed on the screen is printed
up to the maximum measurable order (Max Order).
• When numeric values are displayed in the All Items or Custom display
Printing cannot be performed. If you attempt to print the data, an error message is displayed.
• In non-numeric displays (waveform display, trend display, etc.)
The WT1800 prints data according to the numeric display settings. For example, when the waveform
display is shown, if the 16-value display would appear when you pressed NUMERIC, then the data for the
measurement functions on the page of the 16-value display that would appear is printed.
• For items with no numeric data, “-------” (no data) is printed.
• If integration is not being performed and thus there is no integrated value, “-------” (no data) is printed. “-------”
(no data) is also printed for the integration time.
• The maximum harmonic order that can be printed is determined by the maximum harmonic order set in the
harmonic measurement (option) menu. For orders with no numeric data, “-------” (no data) is printed.
• Functions ΔU1 to ΔPΣ are printed according to the delta computation (option) type that you selected in the
delta computation settings.