YOKOGAWA WT1800 User Manual Download Page 132 | Manualshive

Page: 132 / 167

background image

18-3

IM WT1801-01EN

File Save Conditions

Displaying a File List and Specifying the Save Destination (File List)

On the file list, specify the save destination. For information about how to configure the file list display and how
to operate files and folders, see “File Operations (Utility).”

Click here.

Saved Items (Item Settings)

This menu item only appears when you select Save Numeric.

Displayed Numeric Items (Displayed Numeric Items)

The saved items vary as indicated below depending on the display.
• When Numeric Values Are Displayed in the 4-, 8-, or 16-Value Display or the Matrix Display
All the measurement functions on the page that is displayed when saving starts are saved in the order that

they are displayed.

• When Numeric Values Are Displayed in the Single or Dual Harmonics List
In addition to the data described above, the data of harmonics that are not displayed on the screen is saved

up to the maximum measurable order (Max Order).

•  When Numeric Values Are Displayed in the All Items or Custom Display
  The data cannot be saved. If you attempt to save the data, an error message is displayed.
•  In Non-Numeric Displays (Waveform display, trend display, etc.)
  The WT1800 saved data according to the numeric display settings. For example, when the waveform

display is shown, if the 16-value display would appear when you pressed NUMERIC, then the data for the
measurement functions on the page of the 16-value display that would appear is saved.

Selected Items (Selected Items)

You can select the types of numeric data to save.

Items (Items)

If you selected Selected Items, select which numeric data to save.

• Element (Element)

To select an element or wiring unit that you want to store the data of, select or clear its check box. You can

select from the following options.

Element1, Element2, Element3, Element4, Element5, Element6, ΣA, ΣB, and ΣC

• Function (Function)

Select whether to store the data of a function by selecting or clearing its check box. You can select any of the

measurement function types listed under “Items That This Instrument Can Measure.”

Click here.

• Selecting All Functions (All ON)

The data of all measurement functions is saved.

• Deselecting All Functions (All OFF)

None of the data for any of the measurement functions is saved.

• Preset 1 (Preset 1)

The data of the following measurement functions is saved for all elements and wiring units.

*

Urms, Irms, FreqU, FreqI, P, S, Q, λ, and Φ

• Preset 2 (Preset 2)

The data of the following measurement functions is saved for all elements and wiring units.

*

WP, WP+, WP–, q, q+, q–, Time, WS, and WQ

* If the wiring system setting (Wiring) is configured so that a wiring unit does not exist, the data for the

functions of that wiring unit is not saved. For example, if ΣC does not exist, the data for ΣC is not saved.

18 Saving and Loading Data

«
...
130
131
132
133
134
...
»

Summary of Contents for WT1800








































































































































































Reviews:

No comments

Related manuals for WT1800

Brand: Valor Pages: 13

Brand: Campbell Pages: 31

Brand: Bacharach Pages: 87

Brand: A&D Pages: 74

Brand: CAENels Pages: 75

Brand: Quantel Pages: 2

Brand: Hach Pages: 38

Brand: Hach Pages: 28

Brand: Hach Pages: 40

POCKET COLORIMETER II

Brand: Hach Pages: 142

Brand: Hach Pages: 4

Brand: Hach Pages: 308

Brand: Hach Pages: 158

Brand: Hach Pages: 118

POCKET COLORIMETER II

Brand: Hach Pages: 116

Brand: Hach Pages: 132

Brand: Hach Pages: 8

Brand: Hach Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands