IM 253401-01E
App2-10
Appendix 2.3 Commands
Command
Description
Page
RELay Group
RELay?
Queries all settings related to the comparator function.
App. 2-28
:RELay:DISPLay
Sets/queries the comparator display OFF, or in case of ON, the channel to be
displayed.
App. 2-28
:RELay:HCHannel<x>?
Queries all settings related to relay output items in case of harmonic analysis.
App. 2-28
:RELay:HCHannel<x>:FUNCtion
Sets/queries function of the relay output item in case of harmonic analysis.
App. 2-29
:RELay:HCHannel<x>:THReshold
Sets/queries the threshold level for the relay output item.
App. 2-29
:RELay:MODE
Sets/queries the mode of the comparator function.
App. 2-29
:RELay:NCHannel<x>?
Queries all settings related to the relay output items in case of normal
measurement.
App. 2-29
:RELay:NCHannel<x>:FUNCtion
Sets/queries the function of the relay output in case of normal measurement.
App. 2-29
:RELay:NCHannel<x>:THReshold
Sets/queries the threshold level for the relay output item.
App. 2-29
:RELay:STATe
Sets/queries the comparator function ON/OFF.
App. 2-29
SAMPle Group
:SAMPle?
Queries all settings related to sampling.
App. 2-30
:SAMPle:HOLD
Sets/queries to hold the output of data (display, communication).
App. 2-30
STATus Group
:STATus?
Queries all settings related to the status of communication.
App. 2-31
:STATus:CONDition?
Queries the contents of the condition filter and clears it at the same time.
App. 2-31
:STATus:EESE
Sets/queries the extended event register.
App. 2-31
:STATus:EESR?
Queries the contents of the extended event register and clears it.
App. 2-31
:STATus:ERRor?
Queries the occurred error code and message.
App. 2-31
:STATus:FILTer<x>
Sets/queries the transit filter.
App. 2-31
:STATus:QMESsage
Sets/queries whether or not to apply the corresponding message to the
query “
STATus:ERRor?
”. App. 2-31
:STATus:SPOLl?(Serial Poll)
Executes serial polling.
App. 2-31
STORe Group
:STORe?
Queries all settings related to storing data.
App. 2-32
:STORe:INTerval
Sets/queries the interval for storing data.
App. 2-32
:STORe:PANel
Saves the set-up parameters to a file.
App. 2-32
:STORe[:STATe]
Sets/queries the store function ON/OFF.
App. 2-32
Common Command Group
*CLS
Clears the standard event register, extended event register and error queue.
App. 2-33
*ESE
Sets/queries the value of the standard event enable register.
App. 2-33
*ESR?
Sets/queries the value of the standard event register and clears it.
App. 2-33
*IDN?
Queries the instrument model.
App. 2-33
*OPC
This command is not supported by this instrument.
App. 2-33
*OPC?
This command is not supported by this instrument, and is always “
1
”.
App. 2-33
*OPT?
Queries installed options.
App. 2-34
*PSC
Sets/queries whether or not to clear some registers at power ON.
App. 2-34
*RST
Initializes the present settings.
App. 2-34
*SRE
Sets/queries the value of the service request enable register.
App. 2-34
*STB?
Queries the value of the status byte register.
App. 2-34
*TRG
Executes the same operation as the TRIG(SHIFT+HOLD) key.
App. 2-34
*TST?
Executes a self-test and queries the results.
App. 2-34
*WAI
This command is not supported by this instrument.
App. 2-34
