IM 253401-01E
App2-32
Appendix 2.3 Commands
2.3.14 STORe Group
The commands in the STORe group are used to make settings relating to and inquiries about storing data. This allows you to
make the same settings as when using the lower menus of [MEMORY]-”StorE” or [MEMORY]-”PnLSt”.
:STORe
:
STAT e
<Space>
OFF
ON
<NRf>
?
INTer val
<Space>
<NRf>
,
<NRf>
,
<NRf>
?
PANel
<Space>
<NRf>
?
<Character string>
;
STORe?
Function
Queries all settings related to storing data.
Syntax
STORe?
Example
STORE?
→
:STORE:STATE 0;INTERVAL 0,0,0
STORe:INTerval
Function
Sets the interval for storage/queries the current setting.
Syntax
STORe:INTerval {<NRf>,<NRf>,<NRf>|<String>}
STORe:INTerval?
{<NRf>,<NRf>,<NRf>}=0,0,0 to 99,59,59
{<String>}=HH:MM:SS
HH
hour
MM
min
SS
sec
Example
STORE:INTERVAL 0,0,0
STORE:INTERVAL “00:00:00“
STORE:INTERVAL?
→
:STORE:INTERVAL 0,0,0
Description
• If the storage interval is set to 0,0,0, the storage
interval becomes 250ms in case of normal
measurement.
• For the storage interval in case of harmonic analysis,
refer to page 9-2.
STORe:PANel
Function
Saves the set-up parameters to a file.
Syntax
STORe:PANel {<NRf>}
{<NRf>}=1 to 4:file number
Example
STORE:PANEL 1
STORe[:STATe]
Function
Sets store ON/OFF, queries the current setting.
Syntax
STORe[:STATe] {<Boolean>}
STORe:STATe?
Example
STORE:STATE ON
STORE:STATE?
→
:STORE:STATE 1
