YOKOGAWA UT Advanced UT32A, User Manual

Page: 74 / 340

6-15
IM 05P01D31-01EN
Monitoring and Control of Regular Operations
6
There are four groups of PID parameters.
The PID parameters can be selected by using the following two methods:
(1) SP group number selection
The PID group which is set in the PID number selection (PIDN) of each SP group is
used.
SP number (SPNO) Target setpoint (SP)
Setting range of PID number
selection (PIDN)
1 SP 1 to 4
2 SP 1 to 4
3 SP 1 to 4
4 SP 1 to 4
When the SP parameter is displayed, the SP number is shown on Group display.
When the PID parameters are displayed, the PID number is shown on Group display.
► Selection by keystroke: 6.6 Selecting Target Setpoint Number (SPNO)
► Selection by contact input: 12.1 Setting Contact Input Function
(2) Zone PID selection
► Selection by each Zone: 8.4 Switching PID
6.4 Adjusting PID Manually