YOKOGAWA UT Advanced UT32A, User Manual

Page: 194 / 340

12-3
IM 05P01D31-01EN
Contact Input/Output Functions
12
PV Red/white Switch (PVRW)
PV color can be switched using contact input. (Status switch)
Contact status Operation Remark
ON Red color –
OFF White color –
Set "10" to the parameter PCMD.
Bit-0 to Bit-2 of SP Number (SP.B0 to SP.B2)
The SP number can be switched using contact input. There are two methods to specify
SP number.
• Status switch 1 (Operation by keystroke or via communication is enabled depending
on the conditions.)
SP number
Contact status
SP.B2 SP.B1 SP.B0
1 OFF OFF ON
2 OFF ON OFF
3 OFF ON ON
4 ON OFF OFF
*1: “1” when the contact input is turned on and “0” when turned off.
*2: SP number can be switched by keystroke or via communication when all contact inputs of SP.B0
to SP.B2 are turned off.
*3: SP number cannot be switched by keystroke or via communication when any contact input of
SP.B0 to SP.B2 is turned on.
*4: The contact input is turned off when the bit of SP number is not assigned to the contact input.
*5: The immediately preceding SP number is held when all contact inputs are turned off.
• Status switch 2 (Operation by keystroke or via communication is disabled.)
SP number
Contact status
SP.B2 SP.B1 SP.B0
1
OFF OFF OFF
2
OFF OFF ON
3
OFF ON OFF
4
OFF ON ON
*1: “1” when the contact input is turned on and “0” when turned off.
*2: Contact input is turned off when the bit of SP number is not assigned to the contact input.
Setting Details
Parameter
symbol
Name
Display
level
Setting range Menu symbol
SP.BC
Bit changing method of
SP number
STD
0: Status switch 1
1: Status switch 2
DI.NU
12.1 Setting Contact Input Function