YOKOGAWA UT Advanced UT32A, User Manual

Page: 49 / 340

4-4
IM 05P01D31-01EN
4.2 How to Set Parameters
The following operating procedure describes an example of setting alarm setpoint (A1).
Operation
1.
Hold down the PARAMETER key for 3 seconds in the Operation Display to call up
the [ MODE ] Menu Display.
2.
Press the Right arrow key to display the [ SP ] Menu Display.
3.
Press the
SET/ENTER
key to display the [
SP
] Parameter Setting Display.
4.
Press the
Down arrow
key to display the [
A1
] Parameter Setting Display.