Name and Functions of Each Part
19
IM 767361-01E
Rear Panel
1.
MAIN POWER switch
Turns commercial power ON and OFF. Turning this switch OFF shuts off the
primary side of the power supply circuit. Turn this switch ON while the batteries
are charging.
2.
Power connector
A 3-prong connector with a protective grounding terminal. Connect using the
power supply cord provided. Always use protective grounding to prevent electric
shock. Only use a power supply within the specified voltage and frequency range.
3.
FUSE
A time lag fuse, rated at 250 V, 3.15 A.
4.
DC power connector
Used to operate the instrument on DC power (10 to 15 VDC).
5.
Output terminal (only when the /DA option is installed)
A connector used for comparator output, external trigger input (both TTL level), or
D/A output.
6.
D/A output terminal (only when the /DA option is installed)
A connector used for D/A output.
7.
Communications connector
A GP-IB or RS-232 used for connecting to a controller (such as a PC) with a
communications cable.
8.
Pressure input port
A pressure input port is also provided on the front panel, but it is not possible to
use both ports at the same time.
9.
Pressure input port (Low)
A pressure input port is also provided on the front panel, but it is not possible to
use both ports at the same time.
10.
Pressure input port (High)
A pressure input port is also provided on the front panel, but it is not possible to
use both ports at the same time.
Side View
MODEL
NO.
SUFFIX
Made in Japan
MODEL
NO.
SUFFIX
Made in Japan
Name plate
Name and Functions of Each Part
