5-13
IM 710105-03E
Specifications
1
2
3
4
5
App
Index
Screen Capture Data Printing and Saving
Item
Specifications
Built-in printer (option)
Prints screen captures in one of the following output formats.
HardCopy: Prints the displayed screen image.
Normal:
Prints only the waveform area of the displayed screen image. The menu is not
printed.
If cursor measurements or automatically measured results are displayed, they are
printed below the waveform area.
Long:
Prints a screen capture whose time axis is magnified 2 to 10 times. The menu is
not printed.
If cursor measurements or automatically measured results are displayed, they are
printed below the waveform area.
USB printer
Prints screen captures on an external printer via USB. Color can be turned on or off.
Supports Epson inkjet printers and HP inkjet printers.
Network printer
Prints screen captures on an external printer via Ethernet.
*
Color can be turned on or off.
Supports Epson inkjet printers, HP inkjet printers, and HP laser printers.
File
Saves screen capture data to the specified storage medium using one of the following save modes.
The storage medium can be set to internal memory or USB storage.
Output data format can be set to PNG or JPEG. Available color settings are OFF, ON, ON (Rev),
and ON (Gray).
HardCopy: Saves the displayed screen image.
Normal:
Saves only the waveform area of the displayed screen image. The menu is not
saved.
If cursor measurements or automatically measured results are displayed, they are
saved below the waveform area.
Wide:
Saves a screen capture whose time axis is magnified twice. The menu is not saved.
If cursor measurements or automatically measured results are displayed, they are
saved below the waveform area.
* On models with the Ethernet option.
Data Storage
Item
Specifications
Waveform data
Saves waveform data (including history waveforms) to the specified storage medium.
*
The saved
data can be loaded into the DLM2000.
Available data formats are binary (.wdf) and ASCII (.csv). Only binary (.wdf) files can be loaded into
the DLM2000.
Waveform data is saved by specifying the data format, the waveform to save, the history range,
the window to be saved (Main, Zoom1, or Zoom2), and the compression method (OFF, P-P, or
Decimation).
Waveform data is loaded by setting the load destination to ACQ memory, REF1 (MATH1), or REF2
(MATH2).
2
If waveform data is loaded into the ACQ memory, the data is cleared when you start waveform
acquisition.
Setup data
Setup data can be saved to the specified storage medium.
1
The saved data can be loaded into the
DLM2000.
Setup data
(storage and recall)
Up to three sets of setup data can be stored and loaded from the internal memory.
Other types of data
The displayed screen image can be saved. Waveform zones can be saved and loaded. Polygonal
zones can be loaded. Snapshot waveforms can be saved and loaded. Automatically measured
waveform parameters can be saved. Serial bus analysis results can be saved. FFT waveform data
can be saved. Histogram data can be saved and loaded.
1 The storage medium can be set to internal memory or USB storage.
2 ACQ memory or REF1 (MATH1) on the DLM2022, DLM2032, and DLM2052.
5.5 Features
