2-14
IM 710105-03E
Connecting FET Probe, Current Probe, Differential Probe, or Deskew Correction
Signal Source
If you are using the YOKOGAWA’s FET Probes, Current Probes, Differential Probes, or
Deskew Correction Signal Source, use the Probe Power (option) on the DLM2000 rear
panel for the power supply. For details on the connection procedure, see the manual that
comes with the respective product.
* For a list of probes and signal sources, see “Optional Accessories” on page vi.
CAUTION
Do not use the Probe Power Terminal (option) on the DLM2000 rear panel for
purposes other than supplying power to the FET Probe, Current Probe, Differential
Probe, or Deskew Correction Signal Source. Also, be sure that the total current of
the four Probe Power Terminals and the four Probe Interface Terminals does not
exceed 1.2 A. Otherwise, the device connected to the Probe Power Terminals or to
the DLM2000 may break.
French
ATTENTION
Ne pas utiliser la borne d’alimentation de sonde (en option) sur le volet arrière du
DLM2000 à d’autres fins que l’alimentation de la sonde FET, sonde de courant,
sonde différentielle ou source de signal de correction Deskew. Vérifier également
que le courant total des quatre bornes d’alimentation de sonde et des quatre
bornes d’interface de sonde ne dépasse pas 1,2 A, car cela risquerait d’endommager
le DLM2000 ou l’appareil connecté aux bornes d’alimentation de sonde.
2.4 Connecting the Probe
