5-14
IM 710105-03E
Other Features
Item
Specifications
Default setup
Resets the DLM2000 to its factory default settings.
The following settings are not reset: date and time settings, communication interface settings,
settings stored to the internal memory, and language settings.
The Undo command can be used to revert to the previous settings.
Auto setup
Automatically sets the voltage scale, time scale, trigger, and other settings to the most suitable
values for the input signals.
The Undo command can be used to revert to the previous settings.
Serial bus auto setup
*
Auto setup can be executed on the basis of the selected serial bus type (FlexRay, CAN, CAN FD,
LIN, CXPI, SENT, PSI5 Airbag, UART, I
2
C, or SPI) and trigger source. The DLM2000 can
automatically set the bit rate, source level, and other settings and trigger on the basis of these
settings.
Calibration
Auto calibration and manual calibration are available.
Environment settings
The date, time, and message language can be specified. The click sound can be turned on and off.
Probe compensation signal
output
Transmits signals from the front-panel probe compensation signal output terminals (approx. 1-Vp-p
and approx. 1-kHz rectangular wave).
Overview
Allows you to view the DLM2000 system status.
Additional option license
Trigger, computation, and analysis options can be added (only on 4-channel models).
Self-tests
Memory, accuracy, and printer tests are available.
Menu language setting
The menu language can be switched.
Help feature
Displays a description of the settings.
* On models with the serial bus option.
5.5 Features
