Preparing for Measurement
3-9
IM AQ6380-02EN
1
2
3
4
5
6
App
Index
3.3 Turning the Power ON/OFF
Preparing to Turn ON the Power
The AQ6380 has a MAIN POWER switch for turning the main power ON/OFF, and a POWER
switch for starting and shutting down the instrument. The POWER switch is a push-button switch;
press once to turn it ON and press again to turn it OFF.
• Confirm that the MAIN POWER switch on the rear panel of the instrument is OFF.
• Connect the power cord plug to the power connector on the rear panel.
• Connect the other end of the cord to an outlet that meets the following conditions. Use a
grounded three-prong outlet.
Item
Rated supply voltage*
100 VAC to 240 VAC
Permitted supply voltage range
90 VAC to 264 VAC
Rated power supply frequency
50/60 Hz
Permitted supply frequency range
48 Hz to 63 Hz
Maximum power consumption
Approx. 100 VA
* This instrument can use a 100 V or a 200 V power supply. The maximum rated voltage differs according
to the type of power cord. Check that the voltage supplied to the instrument is less than or equal to the
maximum rated voltage of the power cord that you will be using before use.
Turn ON the Power
CAUTION
Do not input a strong light source to the instrument when turning the power ON. If a strong
light source is input, the optical section can be damaged.
ATTENTION
Ne retirez pas le dispositif de stockage USB et ne coupez pas l’alimentation lorsque le voyant
d’accès au dispositif de stockage USB clignote. Cela risquerait d’endommager le dispositif ou
les données se trouvant sur ce dernier.
Power On and Screen Display
1.
Connect the power cord to the power cord connector on the back side of the instrument.
Three-prong outlet
Power cord
