YOKOGAWA 800 plus, Instruction Manual

Page: 34 / 80

34
KEYSTROKES FOR SETUP
If the MENU key does not work, see Section 9 “Enabling & Locking Out Menu Items.”
Menus are dynamic. Menu items will only appear if appropriate for previously made menu
selections. For example, Batch menu items will only appear if “Batch” was selected under
“Rate.” Extended counter items will only appear if “Extended” was selected under “Config.”
Press
Menu Press Digit
Select Key Press Value Select
Key
_ InPut
Input
VF0-10
0-10V full-scale input
VF4-20
4-20 mA full-scale
input
VF_0-1
0-1 mA full-scale input
B
a
s
ic
A
_
OnLy Rate for Channel A (Item #1).
A _ Atot . Rate for Channel A (Item #1). Total for
Channel A (Item #2).
E
x
te
n
d
e
d
_ bAtCH Batch control mode. Batch total (Item #1).
Grand total or number of batches (Item #2). Fill rate
(Item #3).
__1/A_ . 1/Rate for Channel A (Item #1).
SEtuP
Setup
_ 0 00_0
Stored totals
0 Zero totals at power-on.
1 Restore totals at power-on.
_0 0 0_0
Leading zeros
0 Blank leading zeros.
1 Display leading zeros.
_00 0 _0
Scale factor 1 setup
0 Input scale factor 1 and offset 1.
1 Use coordinates of 2 points method.
_000_ 0
Operation of rear connec-
tor inputs 1 & 2.
True = logic 1 (0V or tied
to digital ground).
False = 0 (5V or open).
0 1 = Meter Reset*, 2 = Function Reset*
1 1 = Meter Reset*, 2 = Meter Hold*
2 1 = Meter Reset*, 2 = Peak or Valley Display*
3 1 = Meter Reset*, 2 = External Gate*
4 1 = Function Reset*, 2 = Meter Hold*
5 1 = Valley Only Display**, 2=Peak Only Display**
6 1 = Function Reset*, 2 = External Gate*
7 1 = Meter Hold**, Peak or Valley Display**
8 1 = Reset Total A**, 2 = Reset Total B**
9 1 = Force Alarm1, 2 = Force Alarm2
A 1 = Meter Reset*, 2 = Display Blank*
B 1 = Function Reset*, 2 = Display Blank*
C 1 = Meter Hold*, 2 = Display Blank*
D 1 = Peak or Valley Display**, 2 = Display Blank**
E 1 = Display Blank, 2 = External Gate*
F 1 = Display Item #2, 2 = Display Item #3
With 1 and 2 at 5V or open, Display Item #1.
-------------------------------------------------------------------
* 1 & 2 both at 0V = Meter Reset (can restore
totals).
** 1 & 2 both at 0V for selections
5 , 7 , 8 , D =
Function Reset* (erases all totals).