Yealink SIP-T40P, User Manual

Page: 116 / 188

User Guide for the SIP-T40P IP Phone
104
Press , or the
Send
soft key to complete the transfer.

Press the
Dir
soft key, and then select
History
. Select the desired list and then
press or to select the entry (Directory should be configured in
advance. Refer to
Directory on page 37 for more information).
Press , or the
Send
soft key to complete the transfer.

Press the
Dir
soft key, and then select
Remote Phone Book
. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to
Directory on page 37 and Remote Phone Book on page 49 for more
information).
Press , or the
Send
soft key to complete the transfer.
Semi-attended Transfer
Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode on DSS key is configured as
New Call
or
Attended Transfer
. For more
information on how to configure it, refer to Configuring Transfer Mode on DSS Key on page
123 .
To perform a semi-attended transfer:
1.
Press the
Tran
soft key during a call.
2.
Do one of the following:
-
Enter the number you want to transfer to.
Press or to dial out.
- Press the
Dir
soft key, and then select
Local Directory
. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to Directory
on page 37 for more information).
Press , or the
Send
soft key to dial out.
- Press the
Dir
soft key, and then select
History
. Select the desired list and then press
or to select the entry (Directory should be configured in advance. Refer to
Directory on page 37 for more information).
Press , or the
Send
soft key to dial out.
- Press the
Dir
soft key, and then select
Remote Phone Book
. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 37 and Remote Phone Book on page 49 for more information).
Press , or the
Send
soft key to dial out.
- If
Allow Trans Exist Call
(refer to Allow Trans Exist Call on page 101 ) is enabled, you
can select the
NewCall
and repeat steps mentioned above to complete transfer.
3.
Press the
Tran
soft key to complete the transfer when receiving ringback.
If you are using a handset, the transfer can be completed by hanging up the handset.