Advanced Phone Features
123
To configure BLF ring type via phone user interface:
1.
Press
Menu
->
Settings
->
Basic Settings
->
Sound
->
BLF Ring Type
.
2.
Press or to select the desired ring tone.
3.
(Optional.) Press to adjust the ringer volume.
4.
Press the
Save
soft key to accept the change or the
Back
soft key to cancel.
BLF ring type is configurable via web user interface at the path
Features
->
Call Pickup
.
When the monitored line receives an incoming call, the following occurs on your phone:
The phone plays a specific ring tone (if enabled).
The BLF key LED flashes red.
The caller ID appears on the LCD screen (if enabled).
In the following figure, the LCD screen shows an incoming call from 103 on the monitored line.
Note
Configuring Directed Call Pickup Code
If you configure the directed call pickup code in advance, you can pick up the monitored user’s
incoming call by pressing the BLF key. You can configure the directed call pickup code when
configuring a BLF key. For more information, refer to
on page
. You
can also configure the directed call pickup code on a global or per-line basis via web user
interface.
If your phone is locked and the type of the phone lock is configured as
Function Keys
or
All
Keys
, you cannot use the
DPickup
,
Send
,
NewCall
and
Cancel
soft keys until unlocked. For more
information refer to
on page
Summary of Contents for SIP-T40P
Page 1: ......
Page 12: ......
Page 132: ...User Guide for the SIP T40P IP Phone 120...
Page 185: ...Appendix 173 Appendix B Menu Structure...
