User Guide for the SIP-T40P IP Phone
48
2.
Press the
Add
soft key.
3.
Enter the name and the office, mobile or other numbers in the corresponding fields.
4.
Press or , or the
Switch
soft key to select the desired account from the
Account
field.
If
Auto
is selected, the phone will use the default account when placing calls to the contact
from the blacklist directory.
5.
Press the
Add
soft key to accept the change or the
Back
soft key to cancel.
To add a contact to the blacklist directory from the local directory:
1.
Press the
Dir
soft key.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to
on page
), press
Menu
->
Directory
->
Local Directory
to
enter the local directory.
2.
Select the desired contact group and then press the
Enter
soft key.
If the contact is not in any group, select
All Contacts
and then
press the
Enter
soft key.
3.
Press or to highlight the desired contact.
4.
Press the
Option
soft key, and then select
Add to Blacklist
.
The LCD screen prompts the following warning:
5.
Press the
OK
soft key to accept the change.
For operating instructions on editing, deleting, placing calls to and/or searching for contacts in
Summary of Contents for SIP-T40P
Page 1: ......
Page 12: ......
Page 132: ...User Guide for the SIP T40P IP Phone 120...
Page 185: ...Appendix 173 Appendix B Menu Structure...
