Yealink SIP-T40P User Manual Download Page 27

Page: 27 / 188

Getting Started

Connect the network and power

You have two options for power and network connections. Your system administrator will

advise

you which one to use.



AC power



Power over Ethernet (PoE)

AC Power

To connect the AC power:

Connect the DC plug on the power adapter to the DC5V port on the phone and connect
the other end of the power adapter into an electrical power outlet.

Connect the included or a standard Ethernet cable between the Internet port on the phone
and the one on the wall or switch/hub device port.

Note

Power over Ethernet

With the included or a regular Ethernet cable, the SIP-T40P IP phone can be powered from a
PoE-compliant switch or hub.

The IP phone should be used with Yealink original power adapter (5V/600mA) only.

The use of

the third-party power adapter may cause the damage to the phone.

Summary of Contents for SIP-T40P





























































































































































































Search results

Summary of Contents for SIP-T40P

Reviews:

Related manuals for SIP-T40P

Brands by name

Popular brands

Yealink SIP-T40P, User Manual

Search results

Summary of Contents for SIP-T40P

Reviews:

Related manuals for SIP-T40P

Brands by name

Popular brands