Configuring Network
43
Parameters of manual VLAN on the system are described below.
Parameter
Description
Configuration Method
Internet
Port
->
Active
Enables or disables VLAN for the
Internet (WAN) port.
Default:
Disabled
Note
: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
VID(1-4094)
Specifies the identification of the
Virtual LAN.
Default:
1
Note
: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Priority
Configures VLAN priority for the
Internet (WAN) port.
Valid values:
0-7
7 is the highest priority, 0 is the
lowest priority.
Default:
0
Note
: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure VLAN for Internet port via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
VLAN
block, select the desired value from the pull-down list of
Internet Port
Active
.
3.
Enter the VLAN ID in the
VID (1-4094)
field.
Summary of Contents for MeetingSpace VC800
