Yealink MeetingSpace VC800, Administrator'S Manual

Page: 138 / 295

Administrator’s Guide for Yealink VC800 Video Conferencing System
124
The call protocol parameter on the system is described below:
Parameter Description Configuration Method
Call Protocol
Specifies the desired call protocol
for placing calls.

Auto
—the system
automatically uses the
available call protocol.

SIP
—the system uses the SIP
protocol for placing calls.

H.323
—the system uses H.323
protocol for placing calls.
Default:
Auto
Remote Control
Web User Interface
To configure call protocol via web user interface:
1.
Click on
Setting
->
Call Features
.
2.
Select the desired value from the pull-down list of
Call Protocol
.
3.
Click
Confirm
to accept the change.
To configure call protocol via the remote control:
1.
Select
More
->
Setting
->
Call Features
->
Call Protocol
.
2.
Select the desired value from the pull-down list of
Call Protocol
.
3.
Select
Save
, and then press to accept the change.