Yealink MeetingSpace VC800, Administrator'S Manual

Page: 58 / 295

Administrator’s Guide for Yealink VC800 Video Conferencing System
44
4.
Select the desired value (0-7) from the pull-down list of
Priority
.
5.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6.
Click
OK
to reboot the phone.
To configure VLAN via the remote control:
1.
Select
More
->
Setting
->
Advanced
(default password: 0000) ->
Advanced Network
.
2.
In the
VLAN
block, check the
Active
checkbox.
3.
Enter the VLAN ID in the
VID(1-4094)
field.
4.
Enter the priority value (0-7) in the
Priority
field.
5.
Select
Save
, and then press to accept the change.
The display device prompts “Reboot now?”.
6.
Select
OK
, and then press to reboot the system immediately.
DHCP VLAN
The system supports VLAN discovery via DHCP. When the VLAN Discovery method is set to
DHCP, the system will examine the DHCP option for a valid VLAN ID. The predefined option 132
is used to supply the VLAN ID by default. You can customize the DHCP option used to request
the VLAN ID.
Parameters of VLAN feature on the system are described below.
Parameter Description Configuration Method
DHCP
VLAN
->
Active
Enables or disables the DHCP VLAN
discovery feature on the system.
Default:
Enabled
Note
: If you change this parameter,
the system will reboot to make the
Web User Interface