Yealink MeetingSpace VC800, Administrator'S Manual

Page: 201 / 295

Configuring System Settings
187
Mix Sending
Content sharing allows users to share content with other conference participants during a call.
When a PC is connected to the VCH50 video conferencing hub, the display device can display
both the camera video and the shared content. The content sharing feature is very useful in the
conference scenario in which content sharing is needed (e.g., a slide or a flash).
During a conference call, the far site may not support receiving shared content. In this case, you
can enable mix sending feature on the system. Mix sending feature allows the sender to
compound multiple video streams (local image+shared content) to one video stream, and then
send it to the far site.
The mix sending parameter on the system is described below.
Parameter Description Configuration Method
Mix
Enables or disables the mix sending
feature on the system.
Default:
On
Web User Interface
To configure mix sending via web user interface:
1.
Click on
Setting
->
Video & Audio
.
2.
In the
Presentation
block, select the desired value from the pull-down list of
Mix
.
3.
Click
Confirm
to accept the change.
Configuring Camera Settings
To display high quality video image, you can configure camera settings as required, such as
white balance, exposure and sharpness.