Yealink MeetingSpace VC800, Administrator'S Manual

Page: 27 / 295

Getting Started
13
Getting Started
This chapter provides basic information and installation instructions for Yealink VC800 systems
in the following sections:

Connecting the VC800 Video Conferencing System

Installing the VC800 Video Conferencing System

Installing Batteries for the Remote Control

Powering the System On

Put the System to Sleep

Powering the System Off

System Initialization

System Startup

Setup Wizard

Enabling Communication with Other Systems

Placing a Test Call to Yealink VC800 System
Connecting the VC800 Video Conferencing System
This section introduces the following:

Connecting the VC800 codec

Connecting the Audio Device
Note
Connecting the VC800 Codec
1.
Connect the
LAN
port on the VC800 codec to a switch/hub device port with the supplied
3m Ethernet cable.
Up to two display devices can be connected to the VC800 codec. Because the display device is
not included in the package, you need to purchase it separately if required. Ensure that the
purchased display device supports HDMI input.
When connecting only one display device to the VC800 codec, display1 port is the only available
port. If dual screen mode is required, you can connect secondary display device to the Display2
port.
To prevent shock, do not connect the power adapter and turn on the power before connecting
all system components.