Yealink MeetingSpace VC800, Administrator'S Manual

Page: 21 / 295

VC800 Video Conferencing System Introduction
7
Mute Indicator LED on the CPE90 Wired Expansion Mic:
LED Status Description
Solid red The CP960 conference phone is muted.
Flashing red The CP960 conference phone is ringing.
Solid green
The CP960 conference phone is placing a call.
The CP960 conference phone is in a call and unmuted.
Off
The CPE90 is not connected to the CP960 conference phone.
The CPE90 is idle.
Battery indicator LED on the CPW90 wireless expansion mic
:
LED Status Description
Solid green for one second
and then off
The CPW90 is turned on.
Solid green for 3 seconds
and then off
The CPW90 is in the idle mode.
Solid green The CPW90 is fully charged.
Solid red The CPW90 is being charged.
Fast flashing red 3 times
and then off The battery capacity is too low to turn on
the CPW90.
Slowly flashing red The battery capacity is less than 10%.
Off
If you tap the mute button, the battery indicator LED on the
CPW90 is still off, this means the CPW90 is turned off.
Mute indicator LED on the CPW90 wireless expansion mic
:
LED Status Description
Solid green
The CP960 conference phone enters the pre-dialing
screen.
The CP960 conference phone is in a call and unmuted.
Slowly flashing red
The CP960 conference phone is receiving an incoming
call.
Solid red The CP960 conference phone is muted.
Fast flashing yellow The CPW90 is in the registration mode.
Slowly flashing yellow
The CPW90 has registered with the CP960 conference
phone, but the CPW90 is out of range.
The CPW90 has registered with the CP960 conference
phone, but the CP960 is turned off.
Flashing red and green
alternately The CP960 conference phone is searching for the
CPW90 which has registered with it.