Yealink MeetingSpace VC800, Administrator'S Manual

Page: 56 / 295

Administrator’s Guide for Yealink VC800 Video Conferencing System
42
3.
Enter the desired time interval in the
Packet Interval (1-3600s)
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5.
Click
Confirm
to reboot the system immediately.
To configure LLDP via the remote control:
1.
Select
More
->
Setting
->
Advanced
(default password: 0000) ->
Advanced Network
.
2.
In the
LLDP
block, check the
Active
checkbox.
3.
Enter the desired value in the
Packet Interval (1-3600s)
field.
4.
Select
Save
, and then press to accept the change.
The display device prompts “Reboot now?”.
6.
Select
OK
, and then press to reboot the system immediately.
Manual Configuration for VLAN
VLAN is disabled on systems by default. You can configure VLAN manually. Before configuring
VLAN on the systems, you need to obtain the VLAN ID from your network administrator.