Yealink MeetingSpace VC800, Administrator'S Manual

Page: 54 / 295

Administrator’s Guide for Yealink VC800 Video Conferencing System
40
TLV Type TLV Name Description
enabled by default.
Port Description
Description of port that sends data unit.
The default value is “WAN PORT”.
IEEE Std 802.3
Organizationally
Specific TLV
MAC/PHY
Configuration/Status
Duplex mode and network speed settings of
the system.
The Auto Negotiation is supported and
enabled by default.
The advertised capabilities of PMD.
Auto-Negotiation is:
1000BASE-T(full duplex mode)
100BASE-TX (full duplex mode)
100BASE-TX (half duplex mode)
10BASE-T (full duplex mode)
10BASE-T (half duplex mode)
TIA
Organizationally
Specific TLVs
Media Capabilities
The MED device type of the system and the
supported LLDP-MED TLV type can be
encapsulated in LLDPDU.
The supported LLDP-MED TLV types are:
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD, Inventory.
Network Policy
Port VLAN ID, application type, L2 priority
and DSCP value.
Extended
Power-via-MDI
Power type, source, priority and value.
Inventory – Hardware
Revision
Hardware revision of the system.
Inventory – Firmware
Revision
Firmware revision of the system.
Inventory – Software
Revision
Software revision of the system.
Inventory – Serial
Number
Serial number of the system.
Inventory –
Manufacturer Name Manufacturer name of the system.
The default value is “IP_Phone”.
Inventory – Model
Name Model name of the system.
The default value is “VC800”.