Yealink CPE80, Administrator'S Manual

Page: 74 / 321

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
58
Parameter Description Configuration Method
server via DHCP option 12. Host
name is optional, so it is not a
mandatory configuration item. For
more information, contact your
network administrator.
If you change this parameter, the
endpoint will reboot to make the
change take effect.
To configure DHCP via web user interface:
1.
Click on
Network
->
LAN Configuration
.
2.
In the
IPv4 Config
block, mark the
DHCP
radio box.
3.
(Optional.) Enter the host name of the endpoint in the
Host Name
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5.
Click
Confirm
to reboot the endpoint immediately.