Yealink CPE80, Administrator'S Manual

Page: 18 / 321

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
2
SIP
SIP
(Session Initiation Protocol) is the Internet Engineering Task Force’s (IETF’s) standard for
multimedia conferencing over IP. It is an ASCII-based, application-layer control protocol
(defined in RFC 3261) that can be used to establish, maintain, and terminate calls between two
or more endpoints. Like other VoIP protocols, SIP is designed to address the functions of
signaling and session management within a packet telephony network. Signaling allows call
information to be carried across network boundaries. Session management provides the ability
to control the attributes of an end-to-end call.
Physical Features of Endpoint
Video conferencing endpoints are in the overall network topology, which are designed to
interoperate with other compatible equipment, including application servers, media servers,
Internet-working gateways, and other endpoints.
In order to operate endpoints in your network successfully, the endpoints must meet the
following requirements:

A working IP network is established.

VoIP gateway is configured for SIP or H.323, and H.323 gatekeeper is configured for H.323.
You can also deploy Cloud server for Cloud platform.

The latest (or compatible) firmware of endpoint is available.

A call server is active and configured to receive and send SIP/H.323 messages.
VC110 All-in-one Unit User Interface
- 2 x HDMI
- 1x DVI-I
- 1 x Line-in (3.5mm)