Yealink CPE80, Administrator'S Manual

Page: 231 / 321

Configuring Endpoint Settings
215
Parameter Description Configuration Method
to Enabled.
To configure far-end camera control via web user interface:
1.
Click on
Setting
->
Video & Audio
.
2.
Enter the desired time in the
Not FECC in call(0~300s)
field.
3.
Select the desired values from the pull-down lists of
Far Control Near Camera
.
4.
Select the desired values from the pull-down lists of
Far Set of Camera Presets
.
5.
Select the desired values from the pull-down lists of
Far Move to Camera Presets
.
6.
Click
Confirm
to accept the change.
To configure far-end camera control feature via the remote control:
1.
Select
Menu
->
Video & Audio->Far-end Camera Control
.
2.
Make the desired changes.
3.
Press the
Save
soft key to accept the change.
Camera Control Protocol
VC110 video conferencing endpoint supports camera control protocols: FECC (Far End Camera
Control). You can enable the FECC protocol for SIP call or H.323 call.
If far site wants to control the local camera, both the far site and local site should enable the
camera control protocol simultaneously. If the FECC protocol is not enabled on either site,
far-end camera control cannot be performed. For example, a SIP call is established between two