Yealink CPE80 Administrator'S Manual Download Page 65

Page: 65 / 321

Getting Started



Endpoint IP address and site name



Status icon



Soft key labels



Video image

The video conferencing phone starts up normally. The phone’s LCD screen displays the site
name, status icon, soft keys, time and date.

If the endpoint has successfully passed through these steps, it starts up correctly and is ready for
use.

Setup Wizard

When you first start up or reset the endpoint, the display device will display the setup wizard.

To complete the setup wizard via the remote control:

Set the language displayed on the display device.

The default language is English.

Press (

Next

soft key) to continue.

Set the date and time (e.g., set the time zone, time format, date format and the type of the
daylight saving time).

Summary of Contents for CPE80


































































































































































































































































































































Search results

Summary of Contents for CPE80

Reviews:

Related manuals for CPE80

Brands by name

Popular brands

Yealink CPE80, Administrator'S Manual

Search results

Summary of Contents for CPE80

Reviews:

Related manuals for CPE80

Brands by name

Popular brands