Yealink CPE80, Administrator'S Manual

Page: 69 / 321

Getting Started
53
Yealink video conferencing endpoint supports Yealink VC Cloud Management
Service/Yealink Meeting Server/StarLeaf/Zoom/Pexip/BlueJeans/Mind/Custom platform.
For more information, refer to
Configuring Video Conference Platform on page 107 .
13.
Press (
Complete
soft key) to complete the setup wizard.
Enabling Communication with Other Endpoints
Depending on your environment, you may need to make the following additional adjustments
to the configuration of your video conferencing endpoint.
Static NAT
If you choose to place your video conferencing endpoints in a private LAN,
you must use Network Address Translation (NAT) to communicate with
outside endpoints. This may include enabling static NAT on your endpoint.
For more information, refer to
Static NAT on page 90 .
Firewall
If your endpoint communicates with other devices through a firewall, you
must configure your firewall to allow incoming and outgoing traffic to the
endpoint through reserve ports. Users placing calls through a firewall to
endpoints with IP addresses may experience one-way audio or video if the
firewall is not properly configured to allow video and audio traffic. For more
information, refer to
Configuring the Endpoint for Use with a Firewall or NAT
on page 86 .
Cloud
If you are using Cloud server in your environment and want to place calls
using Cloud account, refer to
Configuring Video Conference Platform on
page 107 .
H.323
If you are using H.323 gatekeepers in your environment and want to place
calls using a name or extension with the H.323 protocol, refer to
Configuring
H.323 Settings on page 138 .
SIP
If you are using Session Initiation Protocol (SIP) servers in your environment
to place calls using the SIP protocol, refer to
Configuring SIP Settings on