Yealink CPE80, Administrator'S Manual

Page: 179 / 321

Configuring Call Preferences
163
Parameter Description Configuration Method
Default:
Auto
If
Auto
is selected, the endpoint will
negotiate the appropriate uplink
bandwidth automatically.
Downlink
Bandwidth
Specifies the maximum receiving
bandwidth for the endpoint.
Default:
Auto
If
Auto
is selected, the endpoint will
negotiate the appropriate downlink
bandwidth automatically.
Remote Control
Web User Interface
To configure bandwidth via web user interface:
1.
Click on
Setting
->
Call Features
.
2.
Select the desired value from the pull-down list of
Uplink Bandwidth
.
3.
Select the desired value from the pull-down list of
Downlink Bandwidth
.
4.
Click
Confirm
to accept the change.
To configure bandwidth via the remote control:
1.
Select
Menu
->
Call Features
->
Bandwidth Settings
.
2.
Select the desired value from the pull-down list of
Uplink Bandwidth
.
3.
Select the desired value from the pull-down list of
Downlink Bandwidth
.
4.
Press the
Save
soft key to accept the change.
Note The priority of bandwidth is as follows: Endpoint bandwidth>Contact bandwidth (refer to add
local contacts ).
For example: the endpoint bandwidth is 512kbps, if contact bandwidth is set to a value greater
than 512bps, than the actual contact bandwidth will be 512bps. If contact bandwidth is set to a
value less than 512bps, than the actual contact bandwidth will be the value set by user.