Yealink CPE80, Administrator'S Manual

Page: 195 / 321

Configuring Endpoint Settings
179
Parameter Description
Configuration
Method
End Hour of Day
to Enabled.
Offset(minutes)
Configures the DST offset time
(in minutes).
Valid values
: -300 to +300.
Note
: It only works if the value
of the Daylight Saving Time is set
to Enabled.
Web User Interface
Time Type
Configures the DST time type.

SNTP:
obtain the time and
date from the NTP server
automatically.

Manual Time:
configure
the time and date manually.
Default:
SNTP
Remote Control
Web User Interface
Time Format/ Time
Configures the time format.

Hour12

Hour24
Default:
Hour 24
Remote Control
Web User Interface
Date Format/Date
Configures the date format.

WWW MMM DD

DD-MMM-YY

YYYY-MM-DD

DD/MM/YYYY

MM/DD/YY

DD MMM YYYY

WWW DD MMM
Default:
YYYY-MM-DD
Remote Control
Web User Interface
To configure the NTP server, time zone and DST via web user interface:
1.
Click on
Setting
->
Date& Time
.
2.
Select
Disabled
from the pull-down list of
Manual Time
.
3.
Select the desired time zone from the pull-down list of
Time Zone
.
4.
Enter the domain names or IP addresses in the
Primary Server
and
Secondary Server
fields respectively.
5.
Enter the desired time interval in the
Synchronism (15~86400s)
field.