1.
Make sure that the power has been disconnected and cannot be turned back on
accidentally.
2.
Disassemble the feedback module in the reverse order of the assembly (see Instal-
lation Guide).
Name
Manual number
Σ
-V Series and
Σ
-7 Series Feedback Option Module
Installation Guide
YEU TOEP C720829 03
3.
Document the disassembly (or replacement) of the feedback module.
4.
Document the disassembly (or replacement) of the SERVOPACK, if applicable.
5.
Document the disassembly (or replacement) of the additional system components,
if applicable.
16.6 Storage Conditions
Store the feedback module in an adequate package with regard to the storage conditions
Chap. 4.2.1 ‘General Specifications’ page 30
16.7 Recommissioning
If you want to put the feedback module back into operation, observe the specifications
under
Chap. 4.2.1 ‘General Specifications’ page 30
. Then follow the instructions in the
corresponding chapter on setting up the feedback module.
Sigma-5 and Sigma-7 Series SERVOPACKs
Disassembly and Storage
Recommissioning
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
111
