16
Disassembly and Storage
16.1 Overview
This chapter describes how to decommission and to store the feedback module.
16.2 Safety Precautions
CAUTION!
–
Do not place an excessive load on the product during storage and
transportation. (Follow all instructions on the packages.)
There is a risk of injury or damage.
NOTICE!
–
Do not install or store the product in any of the following locations.
–
Locations that are subject to direct sunlight
–
Locations that are subject to ambient temperatures that exceed
product specifications
–
Locations that are subject to relative humidities that exceed
product specifications
–
Locations that are subject to condensation as the result of
extreme changes in temperature
–
Locations that are subject to corrosive or flammable gases
–
Locations that are near flammable materials
–
Locations that are subject to dust, salts, or iron powder
–
Locations that are subject to water, oil, or chemicals
–
Locations that are subject to vibration or shock that exceeds
product specifications
–
Locations that are subject to radiation
If you store or install the product in any of the above locations, the
product may fail or be damaged.
–
Do not subject connectors to shock.
There is a risk of faulty connections or damage.
–
If disinfectants or insecticides must be used to treat packing materials
such as wooden frames, plywood, or pallets, the packing materials
must be treated before the product is packaged, and methods other
than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core
temperature of 56°C for 30 minutes or more.
If the electronic products, which include stand-alone products and
products installed in machines, are packed with fumigated wooden
materials, the electrical components may be greatly damaged by the
gases or fumes resulting from the fumigation process. In particular,
disinfectants containing halogen, which includes chlorine, fluorine,
bromine, or iodine can contribute to the erosion of the capacitors.
Storage and Transporta-
tion Precautions
Sigma-5 and Sigma-7 Series SERVOPACKs
Disassembly and Storage
Safety Precautions
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
109
