4.2 Name and Description of Main Circuit Terminals
Terminal Signal
Name
Description
R, S, T
Main circuit power supply input
terminal
+10
Three-phase 200 to 230 VAC % , 50/60 Hz
-15
U, V, W
Motor terminal
Connects to the Servomotor.
r , t
Control power supply input
terminal
+10
Single-phase 200 to 230 VAC % , 50/60 Hz
-15
(j) x 2
Ground terminal
Connects to ground (for grounding the power supply and Servomotor).
P B
,
Regenerative resistor unit
terminal
SERVOPACK with 5 kW or less capacity (external connection is usually not
needed.)
P1, B
Regenerative resistor unit
terminal
SERVOPACKS with 6 kW or higher capacity
N
Main circuit negative terminal
External connection is usually not needed.
Specifications for
SERVOPACK Connector
Applicable Receptacle Model
Solder
Case
Manufacturer
10226-52A2JL
(Product of SUMITOMO 3M Co.,
Ltd.), 26 pin right angle
10126-3000VE
10326-52A0-008
SUMITOMO 3M Co., Ltd.
Specifications for
SERVOPACK
Connector
Applicable Receptacle Model
Cable Specifications
(see note)
Solder
Case
Manufacturer
10220-52A2JL (Product of
SUMITOMO 3M Co.,Ltd.),
20 pin right angle
10120-3000VE
10320-52A0-008
SUMITOMO 3M Co.,
Ltd.
See 9.3 "Cables".
4.2 Name and Description of Main Circuit Terminals
Table 4.1 N a m e and Description of Main Circuit Terminals
Note SERVOPACKS with 5 kW or less capacity do not have a P1 terminal.
4.3 Applicable Receptacles
4.3.1 1CN Connector for I/O Signals
Table 4.2 S p e c i f i c a t i o n s for Applicable SERVOPACK I/O Signal Receptacles
4.3.2 2CN Connector for Encoder
Table 4.3 A p p l i c a b l e Receptacle and Cable Specifications
Note This cable is available from Yaskawa. Refer to 9.3
"Cables"
for more de ails on cables.
4 -7