YASKAWA JEPMC-MP2300S-E, User Manual

Page: 214 / 462

6.2 Communication with Other MP Series
6.2.2 When the MP2300S Acts as a Slave (ladder program which uses a MSG-RCV function)
6-24
Parameter list setting example for message receive function
An example of a parameter list setting when receiving messages from a transmit source using the connection with
a connection number = 2 follows:
Note: IN: Input, OUT: Output, SYS: For system use
Table 6.5 Parameter List Setting Example (parameter list start address Param=DA00000)
Register
Number
Setting
Value
Parameter
Number
IN/OUT Remarks
DW00000
- PARAM00 OUT
Process result
DW00001 - PARAM01 OUT
Status
DW00002
00002 PARAM02 IN
Connection number = 2
DW00003
- PARAM03 OUT
Option
DW00004
- PARAM04 OUT
Function code
DW00005
- PARAM05 OUT
Data address
DW00006
- PARAM06 OUT
Data size
DW00007
- PARAM07 OUT
Remote CPU number
DW00008
00000 PARAM08 IN
Coil offset = 0 word
DW00009
00000 PARAM09 IN
Input relay offset = 0 word
DW00010
00000 PARAM10 IN
Input register offset = 0 word
DW00011
00000 PARAM11 IN
Holding register offset = 0 word
DW00012
00000 PARAM12 IN
Writable address lower limit = MW00000
DW00013
65534 PARAM13 IN
Writable address upper limit = MW65534
DW00014
- PARAM14 SYS
Reserved by the system. (Zero clear at startup)
DW00015
- PARAM15 SYS
Reserved by the system.
DW00016
- PARAM16 SYS
Reserved by the system.