YASKAWA FSDrive-MV1000 Series, Instructions For Use Manual

Page: 115 / 260

4.3 The Drive and Programming Modes
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions 115
St
ar
t-
Up Pro
gr
ammi
ng
&
O
p
er
at
io
n
4
n
Drive Mode Details
The following actions are possible in the Drive Mode:
• Run and stop the drive
• Monitor the operation status of the drive (frequency reference, output frequency, output current, output voltage, etc.)
• View information on an alarm
• View a history of alarms that have occurred
Note: To run the drive, select the Drive Mode. Other modes are selectable while the drive is stopped, but the drive will only start
operation when in Drive Mode.
Figure 4.6 illustrates how to change the frequency reference from 0.00 Hz to 6.00 Hz while in the Drive Mode.
Figure 4.6
Figure 4.6 Setting the Frequency Reference while in the Drive Mode
Note: The drive will not accept a change to the frequency reference until the ENTER key is pressed after the frequency reference is
entered. This feature prevents accidentally setting the frequency reference. To have the drive accept changes to the frequency
reference as soon as changes are made without requiring the ENTER key, set o2-05 to 1.
n
Programming Mode Details
The following actions are possible in the Programming Mode:
• Verify Menu : Check a list of parameters that have been changed from their default values
• Setup Group : Access a list of commonly used parameters to simplify setup (Refer to Simplified Setup Using the
Setup Group on page 116 for details.)
• Parameter Setting Mode : Access and edit all parameter settings
• Auto-Tuning Mode : Automatically calculates and sets motor parameters to optimize drive performance
ESC
F1 F2
← →
← → ← →
Frequency reference
display at power up
Press to select LOCAL
Press until the frequency
reference changes to 006.00 Hz
left right
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.00A
DRV
FREF (OPR)
Rdy
JOG
FWD
FWD/REV
LSEQ
LREF
- MODE -
U1-01= 6.00Hz
U1-02= 0.00Hz
U1-03= 0.00A
DRV
FREF (OPR)
Rdy
JOG
FWD
FWD/REV
LSEQ
LREF
-MONITR-
FREF (d1-01)
U1-01= 0 00.00Hz
“0.00Hz”
DRV
FWD
Rdy
-MONITR-
FREF (d1-01)
U1-01= 00 6 .00Hz
“0.00Hz”
DRV
FWD
Rdy -MONITR-
FREF (d1-01)
U1-01= 00 6 .00Hz
(0.00 ~ 50.00)
“0.00Hz”
DRV
FWD
Rdy
Entry Accepted (0.00 ~ 60.00)
(0.00 ~ 50.00)
common_TMonly