model no.
060-0608-2
| contact us: 1.866.523.5218
66
MAINT
eNANC
e
7. Unhook the connector. (Fig. 77)
8. Perform the steps in reverse to fully
reassemble the snowblower.
9. Perform a drive test to confirm
everything is in working order.
Figure 77
RePlACe CHUTe DefleCTOR CAble
Make sure all fluids are removed and spark plug is disconnected.
Tools required:
–
13 mm wrench
–
Needle nose pliers
To remove and replace your snowblower’s chute deflector cable, proceed as follows:
1. Adjust deflector to fully upright, open
position by moving the control all the
way back. (Fig. 78)
Figure 78
2. Locate the chute deflector cable (A),
connected to the chute deflector (B),
then push down on the chute deflector
and remove the connector from the
bracket. (Fig. 79)
A
b
Figure 79
