![background image](http://html1.mh-extra.com/html/yardworks/060-0608-2/060-0608-2_operators-manual_4659751058.webp)
model no.
060-0608-2
| contact us: 1.866.523.5218
58
MAINT
eNANC
e
RePlACe AUGeR belT
Make sure all fluids are removed and spark plug is disconnected.
Tools required:
–
10 mm wrench.
–
13 mm wrench.
To remove and replace your snowblower’s auger belt, proceed as follows:
1. Remove the plastic belt cover on the
front of the engine by removing two
M6 × 12 bolts and flat washers.
(Fig. 59)
Figure 59
2. Remove belt guide (A) by removing
two M8 x 20 bolts, flat and locking
washers. (Fig. 60)
A
Figure 60