![background image](http://html1.mh-extra.com/html/yardworks/060-0608-2/060-0608-2_operators-manual_4659751051.webp)
model no.
060-0608-2
| contact us: 1.866.523.5218
model no.
060-0608-2
| contact us: 1.866.523.5218
51
MAINT
eNANC
e
ADJUST DISCHARGe CHUTe DefleCTOR CAbleS
Make sure all fluid are removed and spark plug is disconnected.
Tools required:
–
10 mm wrench.
To adjust the chute deflector cable, when it does not open fully or does not tip down
enough, proceed as follows:
1. Locate the chute deflector control lever
on the control panel. (Fig. 44)
Figure 44
2. Move the chute deflector lever (A) all
the way back to move the deflector to
the highest, near vertical position.
(Fig. 45)
A
Figure 45
3. On the chute deflector control cable,
slide back the rubber boot and loosen
the two nuts (B), one each side of the
bracket as shown. (Fig. 46)
b
Figure 46