![background image](http://html1.mh-extra.com/html/yardworks/060-0608-2/060-0608-2_operators-manual_4659751019.webp)
model no.
060-0608-2
| contact us: 1.866.523.5218
model no.
060-0608-2
| contact us: 1.866.523.5218
19
A
SS
eM
bl
y
ReMOVe THe WHeelS
To make the lower handle easier to assemble, remove the wheels from both sides. For
each wheel, locate the pin (A) holding the wheel on. Lift the ring (B) around the axle (C) and
then pull the pin (A) out holding the wheel on (Fig.1). Repeat on the other side. Remove the
wheels and carefully place the snowblower on the ground.
A
b
C
Figure 1
A
D
b
C
e
Figure 2
HANDle
1. Attach the lower handle (A) onto
the unit body with 2 bolts (B), and 2
curved rectangular washers (C) for the
top holes and then 2 bolts (D), and 2
flat washers (E) for the bottom holes
using included tool or your own 13 mm
wrench (Fig. 2). Torque until snug. Do
not overtighten.